8 - SPECIFICATIONS
Four wheel drive machines with 19.5L x 24 rear tires
Long lip bucket
4 in 1 bucket
A. Overall operating height, fully raised
4170 mm
(
164.2 in
)
4353 mm
(
171.4 in
)
B. Height to bucket hinge pin, fully raised
3405 mm
(
134.1 in
)
C. Overall height, travel position
2741 mm
(
107.9 in
)
D. Overall length with bucket on the ground
with three point hitch
5154 mm
(
202.9 in
)
5088 mm
(
200.3 in
)
with
1361 kg
(
3000 lb
) rear counterweight
4950 mm
(
194.9 in
)
4884 mm
(
192.3 in
)
E. Dump angle at full height
46 °
45 °
2712 mm
(
106.8 in
)
F. Dump height,
45 °
dump
2934 mm
(
115.5 in
)
2634 mm
(
103.7 in
)
with clam open
644 mm
(
25.4 in
)
G. Dump reach,
45 °
dump
657 mm
(
25.9 in
)
299 mm
(
11.8 in
)
with clam open
H. Dump height
Same as F.
I. Dump height
Same as G.
J. Roll back at ground
40 °
K. Height to bucket hinge pin at SAE carry
326 mm
(
12.8 in
)
371 mm
(
14.6 in
)
L. Bucket rollback at SAE carry
45 °
45 °
M. Bucket rollback at full height
Adjustable
180 mm
(
7.1 in
)
N. Digging depth below grade, with bucket flat
199 mm
(
7.8 in
)
111 mm
(
4.4 in
)
with clam open
P. Wheelbase
2146 mm
(
84.5 in
)
Overall width (rear tires)
2077 mm
(
81.8 in
)
Bucket cutting edge width
2085 mm
(
82.1 in
)
2083 mm
(
82.0 in
)
Ground clearance between tires (driveshaft guard)
313 mm
(
12.3 in
)
Ground clearance, front axle differential
276 mm
(
10.9 in
)
8-9
Summary of Contents for 570NXT
