6 - WORKING OPERATIONS
Setting the backhoe attachment in working position
WARNING
Avoid injury!
Operate controls only when seated in the operator's seat.
Failure to comply could result in death or serious injury.
W0956A
WARNING
Hazard to bystanders!
Always sound the horn before starting the machine. Make sure the work area is clear of other persons,
domestic animals, tools, etc. before you operate the machine. Never allow anyone in the work area
during machine operation.
Failure to comply could result in death or serious injury.
W0304A
WARNING
Unexpected machine movement!
Before you use the backhoe attachment, make sure that the machine is resting on the stabilizers.
Failure to comply could result in death or serious injury.
W1326A
WARNING
Overturning hazard!
Be careful when you operate the machine on a hillside. You must be in the operator's seat (loader
operation position) when you move the machine forward. Always engage the parking brake and shift
the direction control lever and the transmission to neutral before you operate the backhoe.
Failure to comply could result in death or serious injury.
W0220A
WARNING
Equipment failure could cause accident or injury!
Always fasten the seat belt securely before you operate the machine. Inspect seat belt parts for wear
and damage. Replace any and all worn or damaged parts of the seat belt prior to operation.
Failure to comply could result in death or serious injury.
W0046C
1. (Side shift version) remove the strap from each stabi-
lizer.
2. The stabilizer pads may be turned around for better
lateral stability.
NOTICE:
Before undertaking any road travel, make
sure to return the stabilizer pads to their original po-
sition.
3. Check that the direction-of-travel control lever is in
neutral position.
4. Make sure the gearshift lever is in neutral position.
5. Make sure that the parking brake lever is in the raised
position.
LEEN11T0171AA
1
6-22
Summary of Contents for 580ST
