7 - MAINTENANCE
Engine running check
WARNING
Hazard to bystanders!
Make sure the area surrounding the machine is clear of all persons before starting the engine.
Failure to comply could result in death or serious injury.
W0090A
1. Keep all non-authorized personnel clear of the area.
Park the machine on level ground, in neutral with the
parking brake applied and the attachment lowered to
the ground. Engage the hydraulic functions lock-out to
neutralize the hydraulic flow.
2. Place the transportation/service link in the service po-
sition in order to prevent unexpected articulation move-
ments.
3. Locate the transmission oil level sight gauge on the
left-hand side of the machine.
4. Ventilate properly to reduce the deadly exhaust fumes.
If you have to perform this check in an enclosed area,
make sure there is ventilation to replace the exhaust
fumes with fresh air.
5. Check the transmission oil level at idle speed with the
oil temperature of
65 – 70 °C
(
149.0 – 158.0 °F
). The oil
level should rise to the top of the gauge. The oil level
must be between the bottom and top of the cross hatch
region.
6. Add
CASE AKCELA NEXPLORE™ FLUID
if neces-
sary. Do not overfill.
7-59
Summary of Contents for 721G Stage IV
