6 - MAINTENANCE
Replacing the return filter
1. Release all pressure in the hydraulic reservoir. Refer
to page
6-37
2. Clean the top of the hydraulic reservoir and clean the
return filter cover.
74AC7A7E
8
3. Remove the cover
(1)
, O-ring
(2)
and compression
spring
(3)
.
4. Take out the filter
(4)
.
5. Install a new filter
(4)
.
6. Check O-ring
(2)
and change it if worn or damaged.
7. Install the compression spring
(3)
and the cover
(1)
.
8. Check the level of the hydraulic fluid and add more if
necessary. See "Filling the reservoir".
BA099A67
9
Replacing the reservoir breather filter element
1. Press the button
(1)
to release all pressure in the hy-
draulic reservoir.
452EE801
10
6-43
Summary of Contents for CX145C SR
