6 - MAINTENANCE
Fluids, fuels and lubricants
Lubricants must have the correct properties for each application.
NOTICE:
The conditions of use for individual fluids and lubricants must be respected.
ATTENTION:
When using the machine in a hot or cold region, consult your CASE CONSTRUCTION Dealer.
Hydraulic fluid
CASE A
KCELA
H
YDRAULIC EXCAVATOR FLUID
is specially designed for high pressure applications and for the CASE
CONSTRUCTION hydraulic system. The type of fluid to be used depends on the ambient temperature.
Temperate climates:
-20 °C
(
-4.0 °F
) to
40 °C
(
104.0 °F
).
CASE A
KCELA
H
YDRAULIC EXCAVATOR FLUID
(MS1230. ISO VG 46. DIN 51524 PART 2 HV)
Hot climates:
0 °C
(
32.0 °F
) to
50 °C
(
122.0 °F
).
CASE AKCELA HYDRAULIC EXCAVATOR FLUID "HOT CLIMATE"
(MS 1216. ISO VG 68. DIN 51524 PART 3 CATEGORY HVLP)
Cold climates:
-25 °C
(
-13.0 °F
) to
20 °C
(
68.0 °F
).
CASE AKCELA HYDRAULIC EXCAVATOR FLUID "COLD CLIMATE"
(MS 1216. ISO VG 32. DIN 51524 PART 2)
Biodegradable fluid:
-30 °C
(
-22.0 °F
) to
40 °C
(
104.0 °F
).
This yellow-coloured fluid is miscible with standard fluid. If used to change standard fluid, it is advisable to drain the
circuit completely before refilling with this fluid.
CASE A
KCELA
H
YDRAULIC EXCAVATOR FLUID
BIO
(MS 1230. ISO VG 46. DIN 51524 PART 2 HV)
Transmission component oil
Extreme pressure oil used for enclosed transmission components.
CASE A
KCELA
G
EAR
135 H EP 80W-90
(SAE 80W-90. API GL 5. MIL-L-2105 D. MS 1316. ZF TE-ML 05A)
Grease
CASE A
KCELA
251H EP M
ULTI
-
PURPOSE GREASE
(NLGI 2)
"Extreme Pressure" multipurpose grease with lithium soap and calcium.
Engine oil
The
CASE T
UTELA
LE E
NGINE
O
IL
is recommended for your engine. This oil ensures correct lubrication of your engine
in all working conditions.
If the
CASE T
UTELA
LE E
NGINE
O
IL
cannot be obtained, use the oil corresponding to one of the following categories:
ACEA E6. API CJ-4.
6-5
Summary of Contents for CX300C
