manualshive.com logo in svg

Case CX350B, Service Manual

The Case CX350B Service Manual is a comprehensive guide for owners and operators of this powerful excavator. Easily downloadable and free of charge from our website, this manual provides detailed instructions and troubleshooting tips to ensure optimal performance. Experience the CX350B's capabilities firsthand with our user-friendly manual available at 88.208.23.73:8080.

Share
Download
background image

Lep SM350B370B1002-2EN

Issued 04-2010

1002-11

Width of track shoe:

CX350B (LC and STD type)600 mm (23.62 in) (Option: 700 mm (27.56 in), 800 mm (31.50 in), 850 mm (33.46), 900 

mm (35.43 in))

CX370B (LC and STD type) 600 mm (23.62 in) (Option: 700 mm (27.56 in), 800 mm (31.50 in))

Minimum ground clearance (To bottom of lower frame) ....................................................................... 480 mm (18.89 in)

Engine

Name.................................................................................................................................................... ISUZU. AH-6HK1X

Type: 4-cycle, water-cooled, overhead camshaft, common rail injection (electric control),

with air-cooling type inter-cooler turbo with air-cooling.

No. of cylinders - bore x stroke ..........................................................................6-dia. 115 mm x 125 mm (4.53 x 4.92 in)

Displacement ....................................................................................................................................... 7790 cc (475 cu.in)

Compression ratio........................................................................................................................................................17.5

Rated output .............................................................................................................................. 202± 3.0 kW / 2000 min

-1

Maximum torque .............................................................................................................. 1080Nm (797 lb-ft) / 1500 min

-1

Engine dimensions (LxWxH)......................................................... 1357 x 995.4 x 1162.5 mm ( 53.42 x 39.19 x 45.74 in)

Oil pan.......................................................................................................................................All direction 35°, inclinable

Starter, reduction type...................................................................................................................................... .24 V, 5 kW

Alternator, AC type.............................................................................................................................................24 V, 50 A

Battery.........................................................................................................................................2x 12V/24V, 136 Ah/5 Hr

Cooling system

Fan type ............................................................................diameter 850 mm (33.5 in), suction type-6blades resin & steel

Pulley ratio .................................................................................................................................................. .80 (reduction)

Direction of rotation....................................................................................... Right (viewed from fan side); compliant with

Radiator capacity .................................................................................................................................................. 96.0 kW

Fin type.................................................................................................................................................................. wavy

Fin space ............................................................................................................................................. 2.0 mm (0.08 in)

Oil cooler capacity................................................................................................................................................. 66.6 kW

Fin type..................................................................................................................................................................Wavy

Fin space ........................................................................................................................................... 1.75 mm (0.07 in)

Inter-cooler capacity.............................................................................................................................................. 29.9 kW

Fin type.............................................................................................................................................................. straight

Fin space ............................................................................................................................................. 2.0 mm (0.08 in)

Fuel cooler capacity ................................................................................................................................................ 1.7 kW

Fin type.................................................................................................................................................................. wavy

Fin space ............................................................................................................................................. 2.0 mm (0.08 in)

Capacity of coolant and lubricants

Coolant........................................................................................................................................................ 30 L (7.92 gal)

Fuel ....................................................................................................................................................... 580 L (153.22 gal)

Lubricant for engine ....................................................................................................................................... 38 L (10 gal)

Lubricant for travel reduction gear (per side) ............................................................................................... 9.5 L (2.5 gal)

Lubricant for swing reduction gear (per side)............................................................................................. 7.9 L (2.09 gal)

Hydraulic oil............................................................................................................................................... 350 L (92.5 gal)

Capacity of hydraulic oil tank .................................................................................................................... 175 L (46.2 gal)

Air conditioning

R134 gas load.............................................................................................................................................. 1Kg (2.20 Ibs)

Hydraulic oil filter

Suction filter (inside tank)....................................................................................................................................105 mesh

Return filter (inside tank)............................................................................................................................................6 

 m

Pilot line filter (inside housing) ...................................................................................................................................8 

 m

Fuel filter

Main filter.....................................................................................................................................................................4 µm

Pre-filter.....................................................................................................................................................................10 µm

Issued 11-2015

Summary of Contents for CX350B




















































Reviews:

No comments

Related manuals for CX350B

OLEO LB Series Installation Manual preview
LB Series
Brand: OLEO Pages: 12
Fantek T-104 Operating Instructions Manual preview
T-104
Brand: Fantek Pages: 40
jcb 65R-1 Quick Start Manual preview
65R-1
Brand: jcb Pages: 28
Wacker Neuson 803 Dualpower Operator'S Manual preview
803 Dualpower
Brand: Wacker Neuson Pages: 228
Hyundai HX235 LCR Service Manual preview
HX235 LCR
Brand: Hyundai Pages: 41

Brands by name

Popular brands

Load more brands