background image

1

Important safety instructions

Please keep this instruction manual in a safe place, along with the purchase receipt and carton for 
future reference. The safety precautions enclosed herein reduce the risk of fire, electric shock and 
injury when correctly adhered to. 

•  The appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have 
been given supervision or instruction concerning the use of the appliance by a person who 
responsible for their safety.

•  Young children should be supervised to ensure that they do not play with the appliance.
•  Use this appliance as intended and described in the instruction manual only. 
•  Always unplug the appliance immediately after use.
•  This appliance should never be left unattended when plugged in.
•  Do not wrap the cord around the appliance.
•  If the appliance stops unexpectedly, switch off the power supply, and unplug from the wall 

socket. Contact the manufacturer or an authorized service representative. 

•  Switch off the power supply and unplug from the wall when not in use, before cleaning and or 

changing accessories.

•  Keep the appliance and cable away from sources of heat, sharp objects or anything that may 

cause damage.

•  Do not operate this appliance if the cable or plug is damaged. Contact the manufacturer or an 

authorized service representative. 

•  Electrical appliances must always be stored in a secure place and out of reach from children.
•  Always ensure that your hands are dry before operating or adjusting any switches on the 

product or touching the plug and main power connection.  

•  Do not use outdoors. This appliance has been designed for domestic indoor use only. 
•  To avoid the risk of electric shock, do not disassemble or attempt to repair the unit. 
•  Do not overload electrical outlet.
•  Do not leave packaging components (plastic bags, cardboard, polystyrene, etc) within the reach 

of children, as it could be dangerous.

•  Do not use while bathing or in a shower.
•  Do not place in or dip into water or other liquids.
•  Do not reach for an appliance that has fallen into water. Unplug immediately.
•  Before use, make certain blades are aligned properly.
•  Do not place appliance on any surface while it is operating.
•  Do not use this appliance if the comb is damaged as injury may occur.

Summary of Contents for PR-803













Reviews: