page
1-6
Part 1. Operation Manual
Rev. 03-2004
Bill Acceptor FL Series Service Manual
Sense-a-Click
(lower)
Sense-a-Click
(upper)
The Validating Head carries a set of Sense-a-Click
™
sensor pak modules
The FrontLoad bill validator is designed accommodate bills of different sizes from 62 to 82 mm width,
and from 125 to 172 mm length – which encompasses most currencies.
Certain currencies have different widths depending on denomination. For accurate validation of such
currencies, the
Validating Head
with a centering mechanism should be used. For currencies of a
fixed-width, the
Validating Head
with a fixed-width path can be used.
Replaceable “
Sense-a-Click
™
” sensor pak modules recognize and validate a specific currency, de-
pending on the hardware installed in the sensor pak. The
Power Interface
module offers different
interface options. The lockable-removable
Cassette
is used for temporary storage of validated bills. It
can be locked with two standard ¾” tubular locks . The Cassette is available in two sizes: 600 or 1000
bill capacity.
Bill Capacity
(600 or 1000 bills) refers to the amount of new bills that the
Cassette
can store. This
amount of street grade bills may not be stored, due to their greater space requirement. The
Housing
joins all the other modules.
Housing
is permanently secured inside a Gaming or Vending machine.
There may be a mechanism for locking the
Cassette
within the
Housing
(Lock Bracket), or there may
be a Plain Bracket. The
Housing
also contains security switches, which detect Cassette removal.
Several
Bezel
styles are available for the FrontLoad. Software updates can be easily completed with a
Memory Card
.
This modular design of the FrontLoad validator allows for replacement of failed modules in the field – in
just seconds!
