CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cash-companies.com / Web: www.cce.tm
UK
Setting the functions
You can adjust the CCE 1400 NEO to your business needs as follows:
Output direction of the banknotes
Hold pressed the CLR /
▲▼
– button for around 3 seconds to change the output direction of accepted banknotes. The
banknotes can be ejected either to the front or rear. Suspected banknotes are generally ejected forward. The display shows
the selected output direction indicated by the two arrows on the display.
Single and total value
Press the ADD / CUR button shortly to switch between the ADD function (adding up all accepted notes) and DEN function
(display the denomination of the last accepted banknote).
The display will show by chosen option ADD "ADD" in the display and the total sum will be displayed. When selected DEN,
the message "ADD" is removed and the display shows the value of the banknote.
Currency display / currency selection
Please choose first the currency you want to test. Therefore you keep the ADD / CUR button pressed for around 3 seconds
to switch between EURO (EUR) and the local currencies (e.g. GBP). The chosen currency will be display in the upper left
display area.
Please note that not all currencies can be detected in all four longitudinal directions. This is due to the position of the security
features on the banknotes, and can’t be influenced by us. If a banknote is not insert in the specified direction and / or position
(e.g. left side), the note is rejected as suspicious.
Note Swiss Franc (CHF): The Swiss Franc has to be inserted with the image on the top on the left side in the feeder slot to
be detected correctly.
Sleep mode and reset the display
Sleep mode
If about 30 seconds no banknote is insert in the CCE 1400 NEO, the device switches to power saving mode and turns off the
value display. If now a bill is inserted into the device, it is automatically drawn in and the unit will return to the test mode.
Clear the display
If about 30 seconds, no banknote is inserted in the CCE 1400 NEO, the unit automatically clears the display, in both modes
(ADD and DEN). If you would like to clear the display manually, press the CLR /
▲▼
button shortly.
Update function
The CCE 1400 NEO can be updated via a special update stick if a new software is needed. Instructions for updating is then
attached to the update stick. The stick is not included to the unit and must be ordered separately.
Information about updates and currency software you will find on our webpage www.cce.tm
Please note that it is necessary to use the power supply for the update procedure. You can’t update the
machine in battery mode.
