CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cash-companies.com / Web: www.cce.tm
UK
Installation of the optional rechargeable battery
Installation of the optional rechargeable battery
If you have opted for an optional battery to operate the CCE 1400 NEO also mobile, please proceed as follows to install the
battery.
1
Open the battery cover on the bottom of the device.
2
Connect the battery cable to the connector. Due to the shape of the connector fitting direction is given.
3
Insert the battery in the designated mould and make sure that the cables are not pinched.
4
Now close the battery compartment and plug the power adapter into the unit to charge the battery. For the first charge,
the device can take up to 12 hours.
5 Please note the legal regulations for disposal of batteries. For more information visit our website
www.cce.tm
Cleaning and Maintenance
Cleaning the sensors
Through the banknotes and settling dust deposits will occur on the sensors
of the machine. These leads to increased non-detections of genuine
banknotes.
Therefore clean periodically the sensors of CCE 1400 NEO. Turn
off the machine when cleaning the unit in general and unplug the
power supply.
1
Grab into the input shaft of the unit and lift it up.
2
With a soft brush and cleaning cloth you can clean the sensors (see
arrows in the picture) and remove the dirt from the transport belts and
rolls.
3
By using special cleaning towels you can maintain the sensors optimal.
