CCE - Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.gmbh / Web: www.cce.gmbh
EN
Page 8
Adjustment and function
The additional settings of the CCE 5060 allow you to adapt it to your individual cash processing requirements.
Addition function
The CCE 5060 has an addition function with which several stacks of banknotes can be counted one after the other and the result
of which is then added. Press the "ADD" button to turn this function on or off. In the display the activated function is indicated
by "ADD". If more than 9,999 notes are counted or the total value exceeds 999,999, the counter is reset to 0.
Batch function / Count stop
With the CCE 5060 you can call up predefined batch values (count stops). Press the "BATCH" button several times to call up the
preset batch values. By briefly pressing the "+1 / +10" key you increase the preset value by 1, by pressing the "+1 / +10" key
longer you increase the preset value by 10. If you need a batch value smaller than 20, you can set it directly using the "+1 / +10"
key.Alternatively, you can enter the batch value directly via the touch screen monitor.
DO NOT USE PENS FOR THIS PURPOSE!
When the set batch value is reached, the machine stops counting. If the counted notes are taken from the stacker, you can
continue counting by pressing the "RESET" button. The machine continues counting the remaining notes until they have been
completely processed or the batch value is reached again. By pressing the "CLEAR" key longer, the batch value is deleted and
the machine counts the inserted notes without stopping. In the upper right display area the set batch value lights up when
activated (e.g. B:100).
Serial number reading
With the CCE 5060, you can read and print out the serial numbers of the banknotes.
In the lower display area you will see the current mode "SN:" if the serial number reading is switched on. After a counting
process, the last serial number read out is displayed here.
Make sure that the function has been activated in the setup menu.
By pressing the "PRINT" key, you can transfer this counting result to an optional thermal printer or to a PC.
Please note that the serial number reading is not possible for all currencies and in all directions.
