Instructions for Omega 230
1.1
While the unit is off, hold down the minus and plus keys and switch the unit
on with the on/off key.
1.2
Enter passcode
message will appear. Enter passcode
1111
when prompted.
1.2 The supervisor menu will now appear, press the arrow down key to select
Scroll Settings (picture A below)
.
1.3 Press the plus key to confirm selection.
1.4 Highlight the
Setting
you want to change/check, then press the plus key to confirm
selection
(picture B below)
.
1.4
Now you need to highlight
All modes
and press the plus key.
1.5 You will then be asked to confirm your currency, highlight the currency you want to
enable/disable and press the plus key
(picture C below)
.
1.6 Press the arrow down key until your denomination is highlighted, then press the
plus key to change setting to Auto to enable or Off to disable currency. When set
to manual, the denomination will not advance automatically.
(picture D below)
.
1.7 Press the key until you get back to the supervisor menu.
You can use the notes key to exit from any settings screen and return to the
previous screen.
Switching individual coins and notes/bills on/off
1.
C
D
A
B
Supervisor Menu
5) Stack Limits/Pack Tols
4) Calibration
6) Scroll Settings
3) Set Float
Scroll Settings Menu
Coupon Settings
Coin Settings
Token Settings
Note Settings
Select Currency
EUR
GBP
Scroll Settings
£10 Poly Note
£10 CB Note
£10 Paper Note
Auto
Off
Auto
Off
£10 Sco Poly Note