Cashtester BC 141 SD
- 5 -
2.3 Update procedure
The BC 141 can be updated via micro SD card or USB connection/computer. Please check the website
www.cashtester.com and/or contact your dealer for further instructions.
Troubleshooting and maintenance
3.1 Description of alerts and error messages
The unit stops the counting process in case of an alert or error and will display one of the following or
messages:
Alert
Reason
F-P
Difference in height of banknote
F-F (UV-fout)
UV-feature not recognized
F-C/F-1/F-2/F-3 (MG-fout)
Magnetic feature not recognized
F-7 / F-8 (IR-fout)
Infrared feature not recognized
Ed / EL
Difference in size compared to note tested before
ES
Folded banknote
EJ / EC
More than 1 banknote feeded
Stacker Full
Stacker full
Error messages:
Error
Location
How to solve the error
E00
UV sensor
Check if the BC 141 SD is properly closed
E10
Hopper sensor
Remove the banknote(s) and clean the hopper sensor
E11
Stacker sensor
Remove the banknote(s) and clean the stacker sensor
E30
Left counting sensor
Remove the banknote(s) and clean the internal part of the
machine by using pressurized air
E31
Right counting sensor
E60-E6B
E70-E7B
IR sensor
E50
Rotation speed sensor
Clean the feeding wheels
E80
Internal memory
Reset to factory settings
3.2 Care and maintenance
Exchange of the fuse
1.
Disconnect the main power cable before opening the cover, otherwise you might risk an
electric shock.
2.
To exchange the fuse, please remove the cover first. Replace the cover properly after
exchanging the fuse.
Exchange of wear and tear parts
Exchange of other wear and tear parts only by Cashtester / Amwit Security B.V. and authorized dealers.
