Shuffle King II user manual
shuffleking2.casinoshuffler.com
Fig. 15:
Use display Calibration function if display does
not react correctly to touches.
When starting the display calibration from the menu, a
black screen (blue screen with older versions) appears
with a small cross in the upper left corner. Touch the
center of the cross with a pointed tool. Then the 2. cross
appears in the lower right corner, touch its center too →
display calibration is completed.
If it is not possible to start calibration from the menu due to poor calibration setting,
you can start the new calibration after turning off the machine by the master switch
and subsequent turning on with simultaneously pressed screen.
Beware of starting unwanted display calibration when turning on the shuffler!
6.3 Information (
3
)
ID
– each shuffler has its own unique ID.
Main sw
– a current software version of the shuffler.
Disp sw
– a current software version of the display.
Temp
– a current shuffler temperature.
RND, sum
– GLI control code.
To clean
– number of shuffling cycles remaining to display a notice recommending cleaning.
Today
– this counter records each shuffling cycle since the last resetting that can be done using
Total
– this counter records each shuffling cycle for the entire period.
Page 11 / 15
