Note
●
Auto Light is disabled when any one of
the conditions below exists.
ー
While an alarm sound, timer sound,
and/or vibration operation is in
progress
●
If you do not disable it manually, Auto
Light remains enabled for
approximately six hours. After that, it
becomes disabled automatically.
Configuring the Auto Light Setting
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[LIGHT].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to
[AUTO LIGHT].
6.
Press (B).
7.
Use (A) and (C) to move the pointer to
[OFF] (disabled) or [ON] (enabled).
●
The [LT] indicator is displayed in the
Timekeeping Mode while Auto Light is
enabled.
8.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the illumination
setting screen will re-appear.
9.
Press (D) twice to exit the setting screen.
Specifying the Illumination Duration
You can select either 1.5 seconds or three
seconds as the illumination duration.
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[LIGHT].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to
[DURATION].
6.
Press (B).
7.
Use (A) and (C) to select an illumination
duration.
[1.5 SEC.]
1.5-second illumination
[3.0 SEC.]
3-second illumination
8.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the illumination
setting screen will re-appear.
9.
Press (D) twice to exit the setting screen.
Useful Features
Pairing the watch with your phone makes a
number of the watch’s features easier to use.
Auto time adjustment
l
12:30
You can use G-SHOCK MOVE to view high
tide and low tide information, Moon age,
sunrise and sunset times, and other
information for a specified port.
l
Data transfer to a phone
l
l
Selection of More Than 300 World Time
cities
l
Configuring World Time Settings
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
l
●
Your phone needs to have the CASIO “G-
SHOCK MOVE” app installed to pair with
the watch.
Operation Guide 3482
6
