●
Manual Time Adjustment
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[TIME ADJUSTMENT].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to
[MANUAL].
6.
Press (B).
This causes a cursor to appear under the
hour setting.
7.
Use (A) and (C) to change the current time
hour setting.
8.
Press (B).
This moves the cursor to the minute
setting.
9.
Use (A) and (C) to change the current time
minute setting.
10.
Press (B).
This moves the cursor to the year setting.
11.
Use (A) and (C) to change the year setting.
12.
Press (B).
This moves the cursor to the month
setting.
13.
Use (A) and (C) to change the month
setting.
14.
Press (B).
This moves the cursor to the day setting.
15.
Use (A) and (C) to change the day setting.
16.
Press (B).
17.
Use (A) and (C) to select whether or not
you want to save your current settings.
[YES]
Saves current settings.
[NO]
Discards current settings.
[RETURN]
Returns to the hour setting
screen.
18.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the time
adjustment screen will re-appear.
19.
Press (D) twice to exit the setting screen.
Note
●
To exit the current time setting
operation at any point, press (D) and
advance to step 17.
●
Switching between 12-hour and 24-
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[TIME ADJUSTMENT].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to
[12/24H].
6.
Press (B).
7.
Use (A) and (C) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
8.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the time
adjustment screen will re-appear.
9.
Press (D) twice to exit the setting screen.
●
While 12-hour timekeeping is selected,
[P] will be displayed for p.m. times.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[AIRPLANE MODE].
4.
Press (B).
5.
Use (A) and (C) to select an Airplane
Mode setting.
[OFF] Exits Airplane Mode.
[ON] Enables Airplane Mode.
6.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timekeeping
Mode setting screen will re-appear.
7.
Press (D) to exit the setting screen.
●
is displayed while the watch is in the
Airplane Mode.
Operation Guide 3482
8
