3.
X
Use (A) and (C) to move the pointer to
[PHONE FINDER].
4.
X
Press (B).
5.
X
Use (A) and (C) to move the pointer to
[EXECUTE].
6.
X
Press (B).
This will establish a connection between
the watch and phone, and sound the
phone’s ringtone.
●
It will take a few seconds before the
phone tone sounds.
7.
X
Press any button to stop the sound.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Note
●
Connection with your phone is not
possible while the watch’s Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
l
Using the Watch in a Medical
Facility or Aircraft
Configuring Watch Settings
After establishing a connection between the
watch and a phone, you can use G-SHOCK
MOVE to configure watch settings and to view
information acquired by the watch.
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
1.
Y
Tap the “G-SHOCK MOVE” icon.
2.
Y
On the menu bar, tap “More”.
3.
Y
Tap “Watch”.
4.
Y
Select your preferred watch.
5.
Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK MOVE is not running on your
phone. On your phone’s home screen,
tap the “G-SHOCK MOVE” icon.
Perform the operation shown on the
screen to pair with the watch.
Unpairing
Unpairing the watch from a phone requires
both G-SHOCK MOVE and watch operations.
Note
●
If you are using an iPhone, also delete
the pairing information stored on the
phone.
●
Deleting Pairing Information from G-
SHOCK MOVE
1.
X
If the watch is connected with a phone,
enable the watch’s Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
2.
Y
Tap the “G-SHOCK MOVE” icon.
3.
Y
On the menu bar, tap “More”.
4.
Y
Tap “Watch”.
5.
Y
Tap “Manage”.
6.
Y
Tap the watch you want to unpair.
7.
Y
Perform the operation shown on the
screen.
●
Deleting Pairing Information from the
Watch
1.
X
Enter the Timekeeping Mode.
l
2.
X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
X
Use (A) and (C) to move the pointer to
[PAIRING].
4.
X
Press (B).
5.
X
Use (A) and (C) to move the pointer to
[UNPAIRING].
Pointer
6.
X
Press (B).
7.
X
Use (A) and (C) to select whether or not
you want to delete the pairing information.
[YES] Deletes pairing information.
[NO] Does not delete pairing information.
8.
X
Press (B).
After pairing information deletion is
complete, [DELETE COMPLETED] will
appear for a few seconds, and then the
Timekeeping Mode setting screen will re-
appear.
9.
X
Press (D) to exit the setting screen.
Operation Guide 3482
13
