Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Barometric Pressure and
Temperature Reading
Precautions
●
Barometric Pressure Reading
Precautions
●
The barometric pressure graph produced
by this watch can be used to obtain an idea
of upcoming weather conditions. However,
this watch should not be used in place of
precision instruments required for official
weather prediction and reporting.
●
Pressure sensor readings can be affected
by sudden changes in temperature.
Because of this, there may be some error in
the readings produced by the watch.
●
Temperature Reading Precautions
●
Body temperature, direct sunlight, and
humidity all have an effect on temperature
readings. To help ensure more accurate
temperature readings, remove the watch
from your wrist, wipe it dry of any moisture,
and place it in a well-ventilated location not
exposed to direct sunlight. You should be
able to take temperature readings after
about 20 to 30 minutes.
Viewing Altitude
Records
You can use the Data Recall Mode to view
manually recorded, auto recorded, and climb
record altitude measurement data.
l
Viewing Recorded Data
1.
Enter the Data Recall Mode.
l
This displays a record of data recorded in
the Altimeter Mode.
2.
Press (B) to select manually recorded
data, auto record data, or climb record
data.
B
B
B
*
Manually Recorded
Data
Auto Record Data
Climb Record Data
* Each press of (B) scrolls through climb
data records from record 1 ([Mt.1]) up to
a maximum of record 14 ([Mt.14]).
3.
Use (A) and (C) to display the data you
want to view.
●
Holding down (A) or (C) scrolls through
settings at high speed.
●
Manually Recorded Data ([-01-] to [-30-])
C
A
*1
Altitude
Month, day * 2
Record number
*1
Each press of the button scrolls through
manually recorded data records from record 1
([-01-]) up to a maximum of record 30 ([-30-]).
*2
The date (month, day) and time alternate
on the display at one-second intervals.
●
Auto Record Data
C
A
A
C
C
A
A
C
*1
*1
*2
*2
High Altitude
Cumulative Descent
Low Altitude
Cumulative Ascent
*1
The recording date (month, day) and time
alternate on the display at one-second
intervals.
*2
The date (month, day) and year when
accumulation started alternate on the display
at one-second intervals.
Watch Operation Guide 3513
26
