E-58
Read This Before You Set the Time and Date!
This watch is preset with a number of city codes, each of which represents the time
zone where that city is located. When setting the time, it is important that you first
select the correct city code for your Home City (the city where you normally use the
watch). If your location is not included in the preset city codes, select the preset city
code that is in the same time zone as your location.
•
Note that all of the times for the World Time City codes (page E-29) and Dual Time
City are displayed in accordance with the time and date settings you configure for
the Timekeeping Mode.
To set the time and date manually
1. In the Timekeeping Mode, hold down
A
for about five
seconds until the left dial hand points to
T1
and the city
code flashes on the upper display. This is the setting
mode.
2. Use
D
and
B
to select the city code you want.
•
Make sure you select your Home City code before
changing any other setting.
•
For full information on city codes, see the “City Code
Table” at the back of this manual.
Summary of Contents for 5054
Page 1: ...Module No 5054 MO0901 EB ...