Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, correct hand alignment.
Correcting Hand Alignment
1.
Pull out the crown to the first click.
2.
Hold down (D) for about five seconds.
This enables adjustment of small hour
hand, small minute hand, and small 24-
hour hand alignment.
Small 24-hour hand
Small minute
hand
Small hour hand
3.
Rotate the crown to align the small hour
hand, small minute hand, and small 24-
hour hand with 12 o’clock.
4.
Press (A).
This enables adjustment of mode hand
alignment.
Mode Hand
5.
Rotate the crown to align the mode hand
with 0.
6.
Press (A).
This enables adjustment of hour hand,
minute hand, and 24-hour hand
alignment.
24-hour hand
Minute hand Hour hand
7.
Rotate the crown to align the hour and
minute hands with 12 o’clock.
8.
Press (A).
This enables adjustment of second hand
alignment.
Second Hand
9.
Rotate the crown to align the second hand
with 12 o’clock.
10.
Press (A).
This enables adjustment of day indicator
alignment.
1
Day indicator
11.
Rotate the crown to align the 1 in the
center of the day indicator.
12.
Push the crown back in.
Moving To Another
Time Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
Configure the World Time (Dual Time) to the
current time at your destination.
Destination time Current time
l
Configuring World Time Settings
l
Configuring Dual Time Settings
●
Prior to Takeoff
Enter the watch’s Airplane Mode when
instructed to do so by airline personnel.
Airplane mark
l
Entering the Watch Airplane Mode
●
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
After swapping
Before swapping
Destination time
Destination time
l
Swapping Your Current Location Time
and Dual Time Settings
2.
Exit the Airplane Mode.
l
Entering the Watch Airplane Mode
Operation Guide 5519
13
