Note
●
Auto time adjustment is not
performed for 24 hours after
swapping of the Home Time and
World Time.
Viewing Stopwatch Data
This section explains how to send lap times
and split times (up to 100 records) stored in
watch memory, as well as the best lap,
average speed, and other data to your phone
for viewing with CASIO WATCH+.
●
Sending Stopwatch Data to a Phone
Use the procedure below to send data from
the watch to a phone.
1.
Y
Tap the “CASIO WATCH+” icon.
2.
X
Hold down the (C) button for about 1.5
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stop at
“R”.
●
The second hand will move to
e
when a
connection is established between the
watch and phone.
3.
Y
Tap in the following sequence:
f
n
“Data Box”.
4.
Y
Tap “Data transfer”.
This displays a list of stopwatch data on
the phone.
●
Tapping a stopwatch data item displays
its details.
●
Checking a Lap Time
Use CASIO WATCH+ to check the data you
sent to the phone.
1.
Y
Tap the “CASIO WATCH+” icon.
2.
Y
Tap the CASIO WATCH+
j
icon.
3.
Y
Tap in the following sequence: “Data
Box”
n
“EQB-501”.
4.
Y
On the list of stopwatch data, tap the
item you want to look up.
This displays the details of the tapped
stopwatch data.
Note
●
Tapping “Edit” displays a screen that
you can use to change the data item
title and to delete lap time data.
●
Viewing Speed Data
Use the procedure below to configure the
watch to indicate speeds.
1.
Y
Tap the “CASIO WATCH+” icon.
2.
X
Hold down the (C) button for about 1.5
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stop at
“R”.
●
The second hand will move to
e
when a
connection is established between the
watch and phone.
3.
Y
Tap “Stopwatch”.
4.
Y
Use the screen that appears to specify
the distance and distance unit.
●
Example: Recording a Race Lap Time
This section explains how to record lap times
while watching a race, and then review the
results using CASIO WATCH+.
30
Before a race
Configure course length and speed unit
settings.
l
During a race
Measure lap times.
1.
X
Hold down (A) for about 2 seconds.
This will cause the watch to enter the
Calendar Mode.
30
2.
X
Press (A) once.
This will cause the watch to enter the
Stopwatch Mode.
30
Speed
Minutes
Hours
24-hour
Seconds
3.
X
Use the operations below to measure
elapsed time.
B
D
D
B
Stop
Start
Pressing (D) at the end of each lap will
record the lap time.
●
Lap times are recorded in units of
1/1000 seconds.
4.
X
Press (D) to reset the elapsed time to
zero.
5.
X
Press (A) twice to return to the Calendar
Mode.
After a race
Check the measured lap times.
l
Sending Stopwatch Data to a Phone
l
Operation Guide 5519
7
