●
Deleting Pairing Information from the
Watch
1.
X
Hold down (D) for at least two seconds
to enter the Timekeeping Mode.
2.
X
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3.
X
Press (D) twice.
This causes the seconds to flash.
Seconds
4.
X
Hold down (B) for at least two seconds.
Release it when [CLR] stops flashing.
This deletes the pairing information from
the watch and returns to the timekeeping
display.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
World Time
World Time lets you look up the current time
in any one of 39 cities around the globe, and
UTC (Coordinated Universal Time).
Note
●
World Time cities that can be selected
only by using G-SHOCK Connected
cannot be selected using watch
operations.
l
Configuring World Time Settings
Checking World Time
1.
Enter the World Time Mode.
l
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
●
You can display the World Time City
while in the World Time Mode by
pressing (A).
World Time City
World Time
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Enter the World Time Mode.
l
2.
Use (B) and (E) to display the city you want
to specify as a World Time City.
3.
To change the summer time setting, hold
down (A) for at least two seconds.
Release the button when [AUTO] starts to
flash.
4.
Use (E) to change the summer time
setting.
Each press of (E) cycles through settings
in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
5.
Press (A) to exit the setting screen.
Operation Guide 5631
9
