12
Getting Ready
Initial Setup
After you first unpack your CASSIOPEIA, perform the following initial setup
procedure before using it for the first time.
1. Load the main battery (rechargeable battery pack) (page 29).
Important
Be sure to use the AC Adapter to charge the battery pack before doing anything else.
Your CASSIOPEIA will not operate correctly if you load the backup battery before
charging the battery pack.
2. Use the AC Adapter to charge the battery pack.
3. Load the backup battery.
4. Press the [Power] button.
•
After a few moments the welcome screen appears.
5. Follow the steps in the Welcome Wizard.
6. When finished, you’ll see the Today screen.
•
See “Pocket PC Basics” at the back of
Quick Start Guide
for information about the
Today screen and other Pocket PC Basics.
•
You also need to install ActiveSync before you can communicate with a desktop
computer.
Important
•
If the touch panel does not respond when you tap it or if nothing appears on the
display, try performing a full reset (page 36). If this does not restore proper operation,
remove the main battery and the backup battery and wait for about five minutes.
Reload the main battery first and then the backup battery, and perform the above
procedure again from step 4.
•
If the message “
A problem with memory contents has been found...
” appears on
the display, perform a full reset (page 36).