Casio Cassiopeia PA-2400 Manual Download

Page: 13 / 17

For information about the File Transfer Utility refer to the C Library Manual.

If connecting via the I/O Box, mount the PA-2400 on the I/O Box.

If the setup has been completed, the PA-2400 restores the screen that was displayed before the utility

was initiated.

3.2 File Download

Transfers the files on the Host PC to the H/PC side.

3.2.1 Specifying File from PC Side

Setup at Host PC

Select "Command" from the "Execute" menu of the Upload/Download Utility to invoke the

Communication Command screen.

Fig. 3.7 Communication Command Screen

Set up the following communication options in this Communication Command:

    Set the "Command" field to "Send".
    In the "File" field enter the pathname of a file to be transferred to the H/PC.
    In the "Destination Dir" field enter the file pathname on the storage destination side.

Summary of Contents for Cassiopeia PA-2400

















Search results

Summary of Contents for Cassiopeia PA-2400

Reviews:

Related manuals for Cassiopeia PA-2400

Brands by name

Popular brands

Casio Cassiopeia PA-2400, Manual

Search results

Summary of Contents for Cassiopeia PA-2400

Reviews:

Related manuals for Cassiopeia PA-2400

Brands by name

Popular brands