background image

E-26

Assembling the Stand

7.

First, use the two 

H

 butterfly bolts to secure 

the back of the piano to the stand. Next, use 
the two 

K

 screws to secure the front of the 

piano.

IMPORTANT!

• The butterfly bolts 

H

 and screws 

K

 keep the piano from 

slipping off the stand. Never use the piano without the 
butterfly bolts 

H

 and screws 

K

 installed.

1.

Orienting the pedal plug as shown in the 
illustration, plug it into the pedal connector on 
the bottom of the piano.

Secure the pedal cord with the clip 

G

.

2.

Check to make sure that the 

POWER

 button 

is in the OFF position (raised). If power is on, 
press the 

POWER

 button to turn it off.

3.

Plug the power cord that comes with the 
digital piano into the AC power jack on the 
bottom of the digital piano.

*

*

AP-400V only

IMPORTANT!

• The shape of the power cord plug and household power 

outlet receptacle differ according to country and 
geographical area. The illustration shows just one 
example of the shapes that are available.

• The power cord of the AP-400 is hard-wired to the digital 

piano.

4.

Plug the power cord into a household power 
outlet.

CAUTION

The screws of the stand can work loose due to the effects 
of temperature and humidity changes, vibration, etc. 
Because of this, you need to periodically check the 
screws for proper tightness. Retighten any loose screws 
you find.

To power the digital piano, use a power outlet that 
allows easy access when plugging in or unplugging the 
power cord.

To connect cables

H

K

G

Pedal plug

Power Cord

Household power outlet

AP400_e.book  26 ページ  2008年4月15日 火曜日 午後12時30分

Summary of Contents for Celviano AP-400






































Reviews: