English
Recording and Play Back
E-13
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
1.
Press the
RECORDER
button twice so its
lamp is flashing.
• At this time the
L
lamp will flash to indicate that the
digital piano is standing by for recording to Track 1.
2.
While holding down the
FUNCTION
button,
press the
RECORDER
(
L
) button or
METRONOME
(
R
) button to select the track
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1:
L
lamp
Track 2:
R
lamp
Example:
Track 1 selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording.
• Tone (page E-4)
• Effects (page E-7)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the
METRONOME
button. See
“Using the Metronome” on page E-8 for more
information.
4.
Start playing something on the keyboard.
• Recording will start automatically.
5.
To stop recording, press the
SONG
a
button.
• This will cause the
RECORDER
button lamp and the
lamp of the track you recorded to change from
flashing to lit.
• To play back the track you just recorded, press the
SONG
a
button.
6.
After you are finished recording or playing
back, press the
RECORDER
button so its
lamp goes out.
To record to a specific track of
a song
AP420_e.book 13 ページ ２００９年６月５日 金曜日 午後３時５６分
