background image

20021201

1-7-1

Variables and Folders

1-7 Variables and Folders

Your ClassPad lets you register text strings as 

variables. You can then use a variable to store

a value, expression, string, list, matrix, etc. A variable can be recalled by a calculation to
access its contents.
Variables are stored in 

folders. In addition to the default folders that are provided

automatically, you can also create your own user folders. You can create user folders as
required to group variables by type or any other criteria.

Folder Types

Your ClassPad stores variables in one of four types of folders described below.

Tip

• You cannot put a folder inside of another folder.

• You can view the contents of a folder, other than “system”, using the Variable Manager (page

1-8-1). Note, however, that you cannot open the “system” folder for viewing.

• The “system” folder contents are listed within the 

(

 page of the keyboard when “Sys” is

selected for “Form”.

Folder Type

Description

“system” Folder

“library” Folder

“main” Folder

User Folder 

This is one of the ClassPad’s reserved folders, which is provided by 
default. It is used for storage of 

system variables, which are pre-

defined variables used by ClassPad applications and other system 
operations.
Some examples of system variables are “list1” through “list6”, View 
Window parameters “xmin” and “xmax”, etc. A system variable can be 
accessed by any application simply by specifying the applicable 
variable name.

Also a ClassPad reserved folder, the “library” folder can be used for 
storing user-created variables. Variables stored in the “library” folder 
can be accessed without specifying a path, regardless of the current 
folder setting (see next page). 

The “main” folder is also a ClassPad reserved folder, and acts as the 
default current folder. While the “main” folder is the current folder, all 
variables created by ClassPad application operations are stored here 
when you do not specify a path for variable storage. 

This is a folder created and named by you. You can make a user 
folder the current folder, move variables to a user folder, etc. You can 
also delete and rename a user folder as required. You can have up to 
87 user folders in ClassPad memory at one time. 

Summary of Contents for CLASSPad300 - ClassPad 300 Touch-Screen Graphing Scientific Calculator































































































































































































































































































































































































































































































































































































































































































Reviews: