Controlling the Keyboard Sounds
EN-14
1.
Select the tone for the right side range (page
EN-12).
Press
bl
TONE
and then use the
ct
number keys, and
the
dk
[–] and [+] keys to select the tone you want.
Example:
255 FLUTE
2.
Press
co
SPLIT
.
3.
Use the
ct
number keys, and the
dk
[–] and [+]
keys to select the left side range tone you
want.
Example:
044 VIBRAPHONE 1
4.
Play something on the keyboard.
This will sound the tones assigned to the left and right
side ranges of the keyboard.
• Pressing
co
SPLIT
again will turn split off.
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
1.
Keep
co
SPLIT
depressed until you finish step
2 of this procedure.
This will cause the key name at the currently set split
point to appear on the display.
2.
Press the keyboard key where you want the
split point to be.
The key you press will become the lowest note of the
right side range of the split keyboard.
Example:
Setting middle C (C4) as the split point.
To split the keyboard between two different
tones
F l u t e
Lights
V i b e s 1
To change the split point
VIBRAPHONE 1
FLUTE
F3
Split point
C 4
Key name
CTX870IN-E-1A.indd 16
2017/12/18 15:24:56