E-29
Data Communication
DT-810 - DT-810/800 Data Communication
Application software and input data can be
transferred between two DT-810 units using the
infrared ports on the bottom of the units.
Position the two DT-810 units so they will not
accidently move during data communication. The
orientation of the two units depends on the type of
communication you plan to perform.
• Conformed IrDA Version 1.0:
0 (contact) to 1 meter or less enables
communication
• Original Communication:
Enabled by contact only
DT-810 - Computer Communication
Data can be transferred directly between the Data
Collector and a personal computer by using a
cable to connect the RS-232C connector on the
right side of the Data Collector to the computer’s
RS-232C connector.
CAUTION!
For IrDA transmission function, high sensitivity element is used in this
unit.
Avoid the proximity of a unit or equipment such as a cellular phone
emitting electrical current during data communication.
To get a smooth transfer using this unit, keep some distance from the
equipment (at least 30 centimeters from a cellular phone).
