90
Viewing Snapshots and Movies
4.
Use [
4
] and [
6
] to display the CS group you want to divide up.
5.
Use [
8
] and [
2
] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
.
Dividing Up All CS Groups
1.
While a CS group is displayed, press [MENU].
2.
Use [
4
] and [
6
] to select the “PLAY” tab.
3.
Use [
8
] and [
2
] to select “Divide Group” and then press [
6
].
4.
Use [
8
] and [
2
] to select “Divide All Groups” and then press [SET].
5.
Use [
8
] and [
2
] to select “Yes”, and then press [SET].
• Once a CS group is divided, it cannot be regrouped.
1.
In the PLAY mode, use [
4
] and [
6
] to scroll through the images until
the one you want is displayed.
2.
Press the zoom button
z
(
[
) to zoom.
You can use [
8
], [
2
], [
4
], and [
6
] to scroll the
zoomed image on the monitor screen. Press the zoom
button
w
to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU] or [BS].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
• Pressing [SET] will lock the current zoom factor for
the on-screen image. You can then use [
4
] and [
6
] to scroll between images,
using the same zoom factor. Pressing [SET] again will unlock the zoom factor
and allow you to use [
8
], [
2
], [
4
] and [
6
] to move around the currently
displayed images.
Zooming an On-screen Image
Image area
Current display area
Zoom factor
