APPENDIX
147
Power does not turn on.
Camera suddenly powers
down.
Image is not recorded
when the shutter release
button is pressed.
Camera powers down
during self-timer
countdown.
Recorded images are not
saved in memory.
1) The battery is not oriented correctly.
2) The battery is dead.
1) Auto Power Off activated (page 34).
2) The battery is dead.
1) The mode selector is set to “PLAY”.
2) Flash unit is being charged.
3) Memory is full.
The battery is dead.
1) Camera powers down before the save
operation is complete.
2) Removing the memory card before the save
operation is complete.
1) Orient the battery correctly (page 25).
2) Charge the battery (page 26). If the battery
goes dead soon after being charged, it means
the battery has reached the end of its life and
needs to be replaced. Purchase a separately
available NP-20 rechargeable lithium ion
battery.
1) Turn power back on.
2) Charge the battery (page 26).
1) Align the mode selector with “REC”.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your
computer and then delete files from image
memory, or use a different memory card.
Charge the battery (page 26).
1) When the battery indicator shows
, charge
the battery as soon as possible (page 26).
2) Do not remove the memory card before the
save operation is complete.
Power Supply
Image Recording
Symptom
Possible Cause
Action
Troubleshooting Guide