115
Other Settings (Set Up)
Procedure
[MENU]
*
Set Up Tab
*
REC/PLAY
• With “Power On/Off”, the camera turns off when you press [
r
] (REC) in the REC
mode or [
p
] (PLAY) in the PLAY mode.
• Change this setting to anything besides “Disable” before connecting to a TV for
image viewing.
Procedure
[MENU]
*
Set Up Tab
*
USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Configuring [
r
] and [
p
] Settings (REC/PLAY)
Power On
Camera turns on whenever [
r
] (REC) or [
p
] (PLAY) is
pressed.
Power On/Off
Camera turns on or off whenever [
r
] (REC) or [
p
] (PLAY)
is pressed.
Disable
Camera does not turn on or off whenever [
r
] (REC) or [
p
]
(PLAY) is pressed.
Configuring USB Protocol Settings (USB)
Mass
Storage
Select this setting when connecting to a computer (pages 89, 98).
With this setting, the computer sees the camera as an external
storage device. Use this setting for normal transfer of images from
the camera to a computer.
PTP
(PictBridge)
Select this setting when connecting to a printer that supports
PictBridge (page 82). This setting simplifies the transfer of image
data to the connected device.