Casio fx-7400G PLUS User Manual Download

Page: 148 / 218

134

Chapter 8

Programming

To recall a program

Example

To recall the file named AREA which is protected by the
password CASIO

1. In the program list, use

and

to move the highlighting to the name of the

program you want to recall.

2. Press

(EDIT).

(EDIT)

3. Input the password and press

to recall the program.

• The message “

Mismatch

” appears if you input the wrong password.

6. Searching for a File

You can search for a specific file name using any of the three following methods.

• Scroll Search — scroll through the file names in the program list.
• File Name Search — input the name of the file.
• Initial Character Search — input the first few letters of the name of the file.

To find a file using scroll search

Example

To use scroll search to recall the program named OCTA

1. While the program list is on the display, use

and

to scroll through the list

of program names until you find the one you want.

2. When the highlighting is located at the name of the file you want, press

(EDIT)

to recall it.

(EDIT)

Summary of Contents for fx-7400G PLUS



























































































































































































































Search results

Summary of Contents for fx-7400G PLUS

Reviews:

Related manuals for fx-7400G PLUS

Brands by name

Popular brands

Casio fx-7400G PLUS, User Manual

Search results

Summary of Contents for fx-7400G PLUS

Reviews:

Related manuals for fx-7400G PLUS

Brands by name

Popular brands