Casio fx-9860G AU PLUS User Manual Download

Page: 522 / 590

20050401

Table Editor Strip Example

In this example, we use a Table Editor strip to input the function

, and reference “List 1”

of the List Editor for the

-variable range to generate a number table.

Things to remember...

• Use the Table Editor to input the function

• Setup Table Editor (using the Setup screen) to reference “List 1” for the

-variable and

generate the numeric table.

• Call up the List Editor to input the data to be used as the range of the

-variable into List 1.

To create a Table Editor strip

1. On the eActivity workspace screen, press

(STRP), select “Table Editor” from the

strip list that appears, and then press

• This will insert a Table Editor strip.

2. Input the strip title, and then press

• Here we will input “Table create”.

3. Press

to call up the Table Editor screen.

• This will display a blank Table Editor screen.

4. Input the function you want to use to generate

the table (Y1 = X

in this example).

5. Press

(SET UP) to display the Setup screen.

• This will display the Table Editor Setup screen, with the “Variable” item highlighted.

6. Press

(LIST). On the dialog box that appears, input “1” and then press

• Specify List 1 as the variable for generating the number table.

7. Press

to close the Setup screen.

10-3-15

Inputting and Editing eActivity File Data

Summary of Contents for fx-9860G AU PLUS















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for fx-9860G AU PLUS

Reviews:

Related manuals for fx-9860G AU PLUS

Brands by name

Popular brands

Casio fx-9860G AU PLUS, User Manual

Search results

Summary of Contents for fx-9860G AU PLUS

Reviews:

Related manuals for fx-9860G AU PLUS

Brands by name

Popular brands