5-3
• % Sto Mem (Specifies storage of percentage values to a list.)
• {
None
}
/
{
List
} ... For percentage values: {Do not store to list}/{Specify List 1 to 26 and store}
When “Box” (med-box graph) is selected as the Graph Type:
• Outliers (outliers specification)
• {
On
}
/
{
Off
} ... {display}/{do not display} Med-Box outliers
When “Bar” (bar graph) is selected as the Graph Type:
• Data1 (first stick data list)
• {
LIST
} ... {List 1 to 26}
• Data2 (second stick data list)/Data3 (third stick data list)
• {
None
}
/
{
LIST
} ... {none}/{List 1 to 26}
• Stick Style (stick style specification)
• {
Leng
}
/
{
HZtl
} ... {length}/{horizontal}
2. Graph draw/non-draw status
[GRPH]-[SEL]
The following procedure can be used to specify the draw (On)/non-draw (Off) status of each of
the graphs in the graph menu.
u
To specify the draw/non-draw status of a graph
1. Pressing
1
(GRPH)
4
(SEL) displays the graph On/Off
screen.
• Note that the StatGraph1 setting is for Graph 1 (GPH1 of the graph menu), StatGraph2 is
for Graph 2, and StatGraph3 is for Graph 3.
2. Use the cursor keys to move the highlighting to the graph whose status you want to change,
and press the applicable function key to change the status.
• {
On
}
/
{
Off
} ... {On (draw)}/{Off (non-draw)}
• {
DRAW
} ... {draws all On graphs}
3. To return to the graph menu, press
J
.
k
Statistical Graph View Window (V-Window) Settings
View Window settings specify the range that needs to be specified when you draw a graph.
View Window settings are configured automatically in the case of statistical graphs (when
“Auto” is specified for the “Stat Wind” setting).
Note
• For statistical graphing, you can select either “Auto” or “Manual” for the “Stat Wind” (page
2-15) item on the setup screen to specify the View Window setting method. For information
about switching between auto and manual, see “To change a mode setup” (page 2-14).
• For the View Window setting procedures you need to perform while “Manual” is selected as
the “Stat Wind” setting, see “Configuring View Window Settings Manually” in this manual
(page 5-16).
• Pie graphs are always displayed in accordance with a predetermined format, regardless of
the current View Window settings.
