13
Table 1.6 Names of parts
No. Part
Name
Description
1 IrDA
communication
port
Align this port with the IrDA communication port of the terminal for data
transfer via the IrDA interface.
2
Detection switch
This switch detects when the terminal is correctly mounted on the Bridge
Satellite Cradle.
“POWER”
Indicates the power status.
Off
: Power is off.
Green
: Power is on and the terminal is correctly mounted on the Cradle.
Red
: Power is on, but the terminal is not correctly mounted on the
Cradle.
“DATA”
Indicates the communication status.
Off
: No communication.
Flashing green
: Communication between the terminal and a PC is
established.
Red
: Connection problem in the Cradle.
“LINE”
Indicates the system status.
Off
: The system is not operational.
3
Status lamp
Green
: The system is operational.
4
Power terminals
These terminals supply power to the terminal mounted on the Cradle.
5
Power switch
Turns on the power on the Cradle.
6
Power adaptor port
Connect the dedicated AC adaptor (AD-S42120AE) to this port.
7
RS-422 ports
Use these two ports (“C-OUT” and “C-IN”) when connecting up to eight
Bridge Satellite Cradles in series.
8
RS-232C port
Use this port when connecting the terminal and a PC via the RS-232C interface.
9
USB port
Use this port when connecting the terminal and a PC via the USB interface.
10
DIP switches
Use these switches to configure the settings on the Cradle.
