background image

                                                                                                 
 

 

43 

 

 

About the battery 
1.

 

Do not attempt to disassemble or solder the battery. Also, do not heat or throw the battery into a fire. 

2.

 

When the button-type battery (memory backup battery) used in this terminal is removed, exercise care 
so as not to accidentally swallow it. Remain aware of the danger to infants. Store the button-type battery 
in an infant-safe location. Should the battery be swallowed, immediately consult a doctor. 

3.

 

If the battery is improperly used, the electrolyte may leak and soil other objects, resulting in fire and 
personal injury. Be sure to observe the following precautions: 

4.

 

Make sure of the polarity (+, or -) of the battery when installing it. 

5.

 

Do not leave this terminal unused for an extended period of time with the battery installed. 

 

About the battery pack 
Do not use the battery pack in a place where it will be exposed to static electricity. The battery pack may 
become hot, explode, or ignite. 

 

Avoid exposing it to water and foreign matter 
Should foreign matter (metal chips, water, liquid chemicals) enter inside the product, immediately turn off the 
IT-10, remove the battery pack, and then contact your CASIO distributor. 

 

Memory protection 
1.

 

Contents of the IT-10 should always be backed up in personal computer to make a separate record from 
that on the terminal. The contents of the memory may accidentally be lost due to battery power 
consumption, etc. This also occurs when this terminal malfunctions or is repaired. 

2.

 

When replacing the battery pack, always refer to the user’s guide accompanied in the carton box. 
Improper battery replacement may lead to unexpected loss or alteration of data. 

 

Place of installation 
1.

 

Do not place the IT-10 in an environment with a significant amount of moisture or dust. Otherwise, a 
fire or electric shock may occur. 

2.

 

Do not use the IT-10 in the vicinity of a cooking table, humidifier, etc., where it will be subjected to oily 
smoke or vapor. Otherwise, a fire or electric shock may occur. 

3.

 

Do not place the IT-10 in an unstable situation, such as on a wobbling platform or shelf. It may fall and 
cause personal injury. 

4.

 

Do not throw the IT-10 into a fire. This may cause a fire or personal injury due to explosion of the 
terminal. 

       

 

Summary of Contents for IT-10 - Cassiopeia M20 - Win Mobile












































Reviews: