53
3.2 Basic Operation
In the system menu a common set of key operations are used. The following list shows the
keys that can be used in the system menu.
Current Condition
Key Operation
Operation Process
8
Moves the line selection cursor up one line.
2
Moves the line selection cursor down one line.
CLR
Moves the line selection cursor to the upper
menu area, if it is located in the lower menu area.
Line cursor is on
RET
Confirms and executes the currently selected
menu item.
0 to 9
Selection of an item or entry of a numeric value.
RET
Confirms the currently selected execution item.
Others
CLR
Cancels the currently selected execution item.
If "FILE TRANSFER" or "MAINTENANCE" is selected for the first time after the system
menu is initiated, the operator is required to enter a password for system security purposes.
For information about password entry refer to Chapter 3.17 “Password Entry".
3.3 List of Functions
Command Screen
Description
Key Click Sound
Switch ON or OFF the key click sound.
Buzzer Volume
Set volume of buzzer.
LCD Contrast
Adjust the brightness of contrast.
Auto Backlight
Set the control of auto backlight.
Auto Power OFF
Set auto power off.
SYSTEM SETUP
Calibration
Adjust the calibration on touch panel.
Ymodem Batch
Start up the YMODEM utility.
FILE TRANSFER
(requires password)
FLINK (IrDA)
Start up the FLINK utility.
Set Date/Time
Set date and time.
MS-DOS Command
Set the command entry mode.
RAM Disk Size
Change the size of RAM DISK.
Format Disk
Format on user disk.
MAINTENANCE
(requires password)
Default Setting
Start up the system initialization.
EXIT (power off)
For information about each function in the list above refer to the following pages.