Casio IT-800 Series Software Manual Download

Page: 167 / 325

167

3.5 Owner Information

This applet is for setting information related to the owner.

Identification Tab

Figure 3-10

Name

This field is for specifying the owner’s name inputting alphabets from the Input Panel appeared at
the lower part on the screen.

Company

This field is for specifying name of the company that the owner belongs to.

Address

This field is for specifying an address.

Telephone

This field is for specifying a phone number.

E-mail

This field is for specifying an e-mail address.

Summary of Contents for IT-800 Series





































































































































































































































































































































Search results

Summary of Contents for IT-800 Series

Reviews:

Related manuals for IT-800 Series

Brands by name

Popular brands

Casio IT-800 Series, Software Manual

Search results

Summary of Contents for IT-800 Series

Reviews:

Related manuals for IT-800 Series

Brands by name

Popular brands