Casio IT-800 Series Software Manual Download

Page: 258 / 325

258

4.7 Contacts

Use Contacts to store and manage the names, addresses, phone numbers, and email addresses of
friends, co-workers, customers, etc.

Figure 4-13

To create a new Contact, tap

New

To find a contact, do one of the following:

•

Begin entering a name in the provided text box until the contact you want is displayed.

•

Use the alphabetical index displayed at the top of the contact list.

•

Filter the list by category. In the contact list, navigate to

Menu

→

Filter

Table 4.4 Menus in the application

Menu Description

New

Creates a new Contact.

Edit

Edits the selected Contact.

Send Contact

Beam

Sends the selected Contact via IrDA or Bluetooth.

Copy Contact

Copies the selected Contact.

Delete Contact

Deletes the selected Contact.

Options ...

Sets up options for Contact.

View By

Name

Displays contact list sorted by name.

Company

Displays contact list sorted by company.

Filter

All Contacts

Displays all Contacts.

Summary of Contents for IT-800 Series





































































































































































































































































































































Search results

Summary of Contents for IT-800 Series

Reviews:

Related manuals for IT-800 Series

Brands by name

Popular brands

Casio IT-800 Series, Software Manual

Search results

Summary of Contents for IT-800 Series

Reviews:

Related manuals for IT-800 Series

Brands by name

Popular brands