– 70 –
IT-9000
6-3. I-CASE-UNIT
6-3-1. I-CASE-UNIT
(1) Undo 5 screws (S3).
[ NOTE ]
For non-MCR type models, undo 3 screws (S3).
GPS Cable
FPC (2D)
FPC (NFC)
FPC (PW-UNIT)
FPC (Touch Panel)
CN (KEY-UNIT)
CN (Trigger)
WAN Antenna
W-LAN Antenna
(2) Disconnect the connectors (3 places).
[ NOTE ]
As the lead wires of the Trigger switch are thin, handle them carefully.
(3) Release the connector lock and disconnect the
FPCs (4 places).
(4) Disconnect the W-LAN antenna, WAN antenn and GPS cable.
[ NOTE ]
The WAN antenna is stuck with double-sided tape.
(5) Remove the I-CASE-UNIT while paying attention to the FPC and cables.
I-CASE-UNIT
Screws (S3)
Screws (S3)
CN (Trigger)
MCR model
