16
Wireless LAN Connection when Using Multiple Projectors at the
Same Time
When using two or more projectors in the same location (same meeting room, etc.), each one is
identified by a unique SSID (service set identifier) that lets each computer keep track of which
projector it is connected to.
The initial default SSID for the projector is casiolpj_default1. If there are two projectors being used at
the same time in the same location, for example, the SSID of the second projector must be changed to
casiolpj_default2 or casiolpj_default3, which are the other two available default SSIDs.
To change the default SSID of a projector
1.
Press the [INPUT] key and select “Wireless” as the input source.
This will project the Wireless standby screen.
2.
Press the [MENU] key.
3.
Use the [
] key to move the highlighting to “Wireless” and then press the
[ENTER] key.
4.
Use the [
] key to move the highlighting to “Change SSID” and then press the
[ENTER] key.
This displays a dialog box like the one shown below for changing the SSID.
5.
Use the [
] and [
] keys to move the highlighting to the SSID you want to select
and then press the [ENTER] key.
6.
To close the dialog box, press the [ESC] key.
Summary of Contents for MA1003-B
Page 46: ...MA1003 B ...
