Appendix
69
Using the Password Feature
The password feature lets you limit use of the projector to specific individuals. Note that the
password feature is not an anti-theft measure.
The projector is preset with an 8-key operation sequence at the factory as an initial default
password. To use the password feature for the first time, use the procedure explained in the
“Option Settings1
J
Power On Password” on page 48 to input the initial default password. Be
sure to replace the initial default password with a unique password created by you as soon
as possible.
Remember that password operations are always performed using the remote controller, so you
should take care not to lose or misplace the remote controller.
Also note that you will not be able to input the password if the remote controller batteries
are dead. You should replace remote controller batteries as soon as possible after you notice
the laser pointer beam is becoming weak.
If you forget your password...
You will not be able to use the projector if you forget the password for some reason. If you
forget the password, you will need to bring the following two items to your CASIO distributor
to have the password cleared. Note that you will be charged to have the password cleared.
1. Personal identification (original or copy of you driver’s license, employee I.D., etc.)
2. Projector unit
Note that your CASIO distributor will not be able to clear the password of your projector
unless you bring both of the items listed above.
Also, keep the projector’s warranty in a safe place.
z
Clearing the password will return all other projector settings (except for the lamp use
time) to their initial factory defaults.
Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest that
you keep a written or other type of record of the password so you can look it up when
necessary.
Password Feature
Summary of Contents for pmn
Page 78: ...MA0412 A ...
