E-54
Connecting to a Computer
7.
File name extensions (.MID, .CM2, etc.) are
not displayed under initial default Windows
settings. Perform the procedure below to turn
on display of file name extensions.
8.
After opening a data folder, perform either of
the following operations to transfer data.
Example:
Renaming downloaded song data to
BIDSNG04.CM2 to the MUSICLIB folder will
make the data user song 004.
9.
Press the
(
FUNCTION
) button to exit the
storage mode.
•
If you are using a Macintosh, drag the PIANO folder
to the Trash and then press the Digital Piano’s
(
FUNCTION
) button.
IMPORTANT!
• The message “ERROR, DATA EXCHANGE” will
appear on the display if a problem occurs during
data transfer. If this happens, check the message in
the “STATELOG” folder (page E-53) on the “PIANO”
drive. Next find the same message in the table on
page E-50 of this manual to determine the cause of
the problem and what action you need to take to
avoid it.
(1)
Open any one of the folders shown above.
(2)
Perform one of the following operations to display
folder information.
•
Windows XP:
On the [Tools] menu at the top of the folder
window, select [Folder Options].
•
Windows Vista:
On the left side of the folder window, click
[Organize] and then select [Folder and Search
Options].
(3)
On the Folder Information window, click the
[View] tab.
(4)
Under “Advanced Settings”, clear the “Hide
extensions for known file types” check box and
then click [OK].
8-1. To transfer data from Digital Piano
memory to a computer, perform the
required operation on your computer to
copy the data from the Digital Piano
folder you opened in step 6 of this
procedure to another location on your
computer.
8-2. To load data from your computer to
Digital Piano memory, first copy the data
you want to load to the data folder you
opened. Next, rename the file as shown
in the “Data File Name”
*
column in the
table under step 6 of this procedure.
*
The value you assign for “nn” in the data file name in
this case specifies the user number (user rhythm, user
song, recorder song, user preset) you want the data to
be assigned to.
