Recording and Play Back
E-19
1.
Press the
RECORDER
button so the
PLAY
lamp is lit.
2.
Use the
+
and
–
buttons to display a song
number (1 to 5).
3.
Press the
RECORDER
button so the
REC
lamp is flashed.
• This will cause the
L/1
lamp to flash.
4.
Use the
PART/TRACK
button to select the
track to which you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Example:
To listen to playback of Track 1 as you record
to Track 2
5.
Select the tone and effects you want to use
for your recording.
6.
Press the
SONG PLAY/STOP
button or play
something on the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
7.
To stop recording, press the
SONG PLAY/
STOP
button.
1.
Press the
RECORDER
button so the
PLAY
lamp is lit.
2.
Use the
+
and
–
buttons to display a song
number (1 to 5).
NOTE
• When a song has something recorded in both tracks, you
can turn off one track and play back just the other track,
if you want. Whether a track is on or off is indicated by
the lamps above the
PART/TRACK
button. Each press of
the
PART/TRACK
button cycles through the different
possible track on/off settings.
3.
Press the
SONG PLAY/STOP
button.
This starts playback of the song and/or track you
selected.
NOTE
• You can change the tempo setting as a track is playing.
• You cannot change the tone setting during playback.
• Press the
SONG PLAY/STOP
button again to stop
playback.
To record to one track of a
song while listening to the
playback of the other track
This indicator appears when the track already
contains recorded data.
Lit (Play)
Flashing (Record Standby)
Playing Back from Digital
Piano Memory
PX800_e.book 19
ページ
２００６年１０月１２日 木曜日 午後１２時５分
