E-65
Use
ful
fe
atu
re
s
Advanced programmings and registrations
Abount clerk interrupt function
There are two types of clerk interrupt function, PROCEDURE 1 and PROCEDURE 2 illustrated below.
In PROCEDURE 1, each clerk has a unique clerk interrupt buffer (memory), and the clerk interrupt func-
tion gives each individual clerk the ability to perform an independent registration operations. In this case,
each clerk is individually linked to a unique clerk interrupt buffer.
In PROCEDURE 2, multiple clerks use the same clerk interrupt buffer, and single clerk interrupt opera-
tion (clerk change during registration) can be performed even when any registration is in progress. In this
case, multiple clerks are linked to a single clerk interrupt buffer.
In the REG and RF modes, clerks can be changed while a transaction is in progress so that multiple
clerks can operate single register simultaneously. For example, if clerk 1 is registering a transaction,
clerk 2 can use the same machine to register a different transaction. Clerk 1 can continue the original
registration from the interrupted point.
PROCEDURE 1
Clerk 1
Sign on <NEw BALANCE>
Sign on <CASH>
Sign on <RECEIPT>
Registration A
Finalization A
Post receipt A
Clerk 2
Sign on <NEw BALANCE>
Registration B
Sign on <CASH>
Finalization B
PROCEDURE 2
Clerk 1
Sign on <NEw BALANCE>
Registration A
Sign on <CASH>
Finalization A+B
Clerk 2
Sign on <NEw BALANCE>
Registration B
•
The register must be programmed to allow the clerk interrupt function.
•
You cannot use the clerk interrupt function on a register together with the check tracking
system.
Summary of Contents for SE-C3500
Page 1: ...User s Manual SE C3500 Electronic Cash Register M size drawer ...
Page 135: ...E 135 Useful features ...
Page 136: ......
