– 1 –
1. SPECIFICATIONS
1-1. PRINTING SPECIFICATION
Printing method:
Direct Line Thermal
Dot pitch:
8 dot / mm
Printing speed:
210 mm per second (Max.)
Printing width:
72mm / 576 dots
Character structure:
8 x 16 (font B)
12 x 24 (font A)
Printing columns:
64 columns / line
44 columns / line
Character size:
1.00 x 2.00
1.50 x 3.00
Fonts:
US-ASCII, Katakana, international characters
Feed speed:
220 mm per second
Interface:
RS232C (serial), 10/100 Base - T/ TX
Command:
ESC / POS compliant
Paper width & diameter:
80 mm (W) x 80 mm Dia. Max.
Thermal head life:
100 Million Pulses / 100 km or more
Cutting method: *2
Partial cut (one point left uncut) *2
Operating temperature:
5 °C ~ 35 °C
Storage temperature:
-20 °C ~ 60 °C
Dimension:
145 mm (W) x 193.2 mm (L) x 120.1 mm (H)
Transfer speed:
38.4 kBps (Max.) : RS-232C
Supply voltage in standby:
24V DC / 100mA
Mean current:
Approx. 1.3 A *3
Power consumption:
Approx. 40 W *3
Weight:
1.1kg
Barcode alignment:
○
Near end sensor:
Near end sensor
*1 Manufactured by SIIP&S Inc. (Former name: Seiko Instruments Inc.)
*2 CAUTION: Paper must be fed 3 mm after cutting to prevent paper jam.
*3 These values vary according to environmental temperature when printed font A (12 × 24) with a rolling
pattern.
1-2. PAPER SPECIFICATION
Paper Width:
79.5 ± 0.5mm (3.13 ± 0.02”)
Paper roll size:
Roll diameter:
Maximum 80 mm (3.15”)
Take-up paper roll width:
80 + 0.5/-1.0mm (3.15 + 0.02/-0.04”)
Specified paper:
Specified thermal roll paper:
NTP080-80
[Paper:TF50KS-E2C Nippon Paper Industries Co., Ltd.]
Packaged roll paper:
[Paper:PD160R-N (Oji Paper Mfg. Co., Ltd.)]
*The following paper can be used instead of the paper above:
Paper: HP220AB1 (Mitsubishi Paper Mills Ltd.)
Paper roll spool diameter: Inside
12 mm (0.47”)
Outside 18 mm (0.71”)
NOTE: The end of the paper roll must be free to come off the spool when finished. It must not be adhesively
attached or attached in another semi-permanent manner.