28
DE
EN
FR
IT
NL
ES
CASO VacuChef 50
4.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following inst-
ructions must be observed for the electrical connection:
•
Before plugging in the unit, compare the voltage and frequency data on the vacuum
sealer’s rating plate (found on the bottom of the unit) with that of your electrical net-
work. This data must be compatible. If in doubt consult a qualifi ed electrician.
•
The use of a multi-plug outlet adapter is not recommended due to fi re danger.
•
Inspect the power cord for damage and ensure it doesn’t run under the unit or over
hot or sharp surfaces.
•
The electrical outlet must be protected by a 16A safety cut-out switch.
•
The electrical safety of the unit is only guaranteed if it is connected to a properly
installed protective conductor system. If in doubt, consult a qualifi ed electrician. The
manufacturer cannot be made responsible for damages due to a missing or damaged
protective conductor.
•
The unit is not intended for operation with an extension cord.
5 Complete Overview
This chapter provides you with an overview of your vacuum sealer and explains some of
its key features.
5.1 Appliance diagram
1
2
3
4
5
6
7
9
8
6a
Bag fi xing bar: Fixes the bag during
vacuuming and sealing.
On/Off power switch
Recessed grips: On both sides of the
device.
Sealing strip: Presses the bag against
the sealing bar.
Gasket: A spare gasket is included in
the scope of delivery.
Vacuuming hose connector: For
vacuuming of vacuum containers or
vacuum zip bags.
1
2
3
4
6
5
