Operation and Handling
caso Master E2
58
15.4 Operating the Appliance
15.4.1 Switching
Off
The complete appliance is switched off using the
Master
On/Standby switch (1)
.
Please
note
►
Note that the appliance’s fan continues to operate for a while
after the appliance has been switched off in order to dissipate the
heat that has built up in the appliance.
15.4.2 Switching
On
Press the
Master On/Standby switch (1),
the keys
light up and
an acoustic signal sounds. Now the device is in standby mode.
Place a suitable cooking pot with its contents to be cooked on the
centre on the hob (Ø 140 mm - 180 mm). Now select the
appropriate hob with the selection button (3).
15.4.3 Power
Stage
Press the
selection key +/- (2)
as long as necessary to select
the power stage (Indicator lamp showing correct power stage).
The preset power stage "5" is selected and the device turns on.
With the
+ / - Keys (2),
you can change the settings at any
time in a range from 1 – 9.
If you press both selection buttons
+ / - Keys (2)
simultaniously, the power stage “0” will be selected.
15.4.4 Timer
After selecting the power level, select the
timer button (4)
.
The display shows the number "0". With the
+ / - keys (2)
, you
can now select the operating time in 1-minute intervals (up to
max. 99 minutes).
If you press the the
+ / - keys (2)
longer, you can select the
operating time in 10-minute intervals.
If you press + and – simultaneously, the timer starts at “00”.
Once the time is up, an acoustic signal sounds and the device
automatically goes into standby mode.