2
INTRODUCTION
You have just bought a CS 79 frame joining machine, so we congratulate on your sensible
choice and thank you for your trust in Cassese products.
The CS 79 benefits from the experience of the joining machines that brought Cassese a cer-
tain reputation. It makes it possible to join wooden mouldings of all profiles ( patent n°
7522814).
The CS 79 is designed to allow the operator to move all around the machine.
The joining operation is carried out by using metal wedges especially designed to perform
a tight join. These wedges come in throw-away plastic cartridges, without glue, individu-
ally lubricated and rust-protected for the toughest challenges.
IMPORTANT : You should not use other wedge cartridges than those manufactured by
Cassese and marketed by official Cassese distributors (registered mark CS).
BEWARE OF COPIES.
ACCESSORIES SUPPLIED WITH THE MACHINE
1 extra long support for triangle top presser with 1 black rubber triangle
(for hardwoods) + 1 white triangle (softwoods)/ 1 spare hammer (wedge driver blade)
4 Allen keys for hexagonal nuts (2,5 - 3 - 4 - 5 mm) / 1 wedge pusher tool /
TECHNICAL SPECIFICATIONS OF CS 79
Minimum moulding width : 3mm (1/8”) Minimum moulding height : 7 mm (¼”)
Furthest stapling position from back of moulding (at 45°) : 74 mm (3”)
Wedge sizes in cartridges of 275 pieces : 3, 4, 5, 7, 10, 12 and 15 mm.
Two wedge types : for soft and for hardwoods.
Machine gross weight : 40 kg (85 lbs)
Dimensions : 507mm(20”)x 507mm (20”)(w/out extension table)x1100 mm high (44”)
OPTIONAL ACCESSORIES AVAILABLE
Cassese Item #
Description
Z 4511
120° Joining angle assembly (for 6-sided frames)
Z 4512
135° Joining angle assembly (for 8-sided frames)
Cassese Item #
Description
For use on
Maxi moulding height
Z 4556
White Triangle with support
Soft wood
65 mm (2 ½”)
Z 887
Black Triangle with support
Hardwoods
65 mm (2 ½”)
Z 4558
Short orange rubber with support
Softwoods
69 mm (2 ¾”)
Z 4559
Short green rubber with support
Hardwoods
69 mm (2 ¾”)
Z 4560
Long orange rubber with support
Softwoods
54 mm (2
3
/
16
”)
Z 4561
Long green rubber with support
Hardwoods
54 mm (2
3
/
16
”)
Z 1800
Long orange rubber w/out support
Softwoods
83 mm (3
5
/
16
”)
Z 1804
Long green rubber w/out support
Hardwoods
83 mm (3
5
/
16
”)
Z 1783
Short orange rubber w/out support
Softwoods
98 mm (3
7
/
8
”)
Z 1791
Short green rubber w/out support
Hardwoods
98 mm (3
7
/
8
”)
GUARANTEE
One year guarantee for parts and labour against manufacturing defects. Wear parts and
those damaged as a result of non appliance with the instructions of the present manual are
excluded from the guarantee.
Other top pressers (
See page 12 NEW VERSION TOP PRESSER) :
